AQ Electric has delivered testing and commissioning for EPC contractors on utility-scale solar plants across the MENA region — including China Energy Engineering Group (CEEC) on the 230 MWp Komombo plant in Egypt and SEPCO – Power China on the 120 MWp Wadi Ad Dawasir plant in Saudi Arabia. From the EPC side, the challenge is always the same: the last months of a project compress thousands of tests, several equipment suppliers, the grid operator, the owner’s engineer, and the lender’s advisor into a schedule with liquidated damages at the end of it. This article explains how testing services for solar EPC contractors work in practice — what EPCs typically outsource, how testing plugs into the construction programme, how test evidence protects the EPC against suppliers and disputes, and what a good testing partner should deliver.
Key takeaways
Testing services for solar EPC contractors provide the specialist people, calibrated equipment, and documentation an EPC needs to test, commission, and hand over a PV plant on schedule. EPCs most often outsource DC string testing to IEC 62446-1, IV curve tracing, EL and thermography, MV cable and substation testing, inverter, tracker and SCADA commissioning support, factory and arrival inspection, and acceptance-test support. Planned well, outsourced testing runs block by block alongside construction rather than after it, catches defects while subcontractors and suppliers are still on the hook, and produces the evidence the owner’s engineer, lender’s advisor, and grid operator need to sign off. The result is fewer retests, fewer disputes, and a faster route to provisional acceptance.
What Are Testing Services for Solar EPC Contractors?
Testing services for solar EPC contractors are specialist testing, inspection, and commissioning services that an EPC contractor procures to verify its own work and its suppliers’ equipment before handing a PV plant to the owner. They differ from owner-side services such as owner’s engineering or lender’s technical advisory in one important way: the testing partner works for the EPC, helping it complete the plant, prove compliance, and achieve acceptance on schedule.
In practice, the testing partner becomes an extension of the EPC’s commissioning team. It may take over entire test packages — for example, all DC string testing and IV curve tracing — or provide specialists for specific systems such as MV cables, transformers, or trackers. It may also supervise the EPC’s own technicians and subcontractors and review their results. What matters is that the tests are done correctly, efficiently, and with records that will stand up to the owner’s and lender’s scrutiny.
Why EPCs Outsource Testing
Peak Workload
Testing demand on a solar project is extremely uneven. For most of construction there is little to test; then, in the final months, every string, combiner, inverter, cable, transformer, and system needs testing at once. Keeping a full in-house testing team for that peak is expensive, and spreading thin internal resources across several projects delays all of them. Outsourcing turns a fixed cost into a variable one that matches the project curve.
Specialist Skills and Equipment
Some tests need specialist instruments and experience that many EPCs do not keep in-house: IV curve tracing at utility scale, EL imaging, radiometric thermography, VLF, tan delta and partial discharge testing of MV cables, and transformer diagnostics. The IEA reports that more than half of the energy organisations it surveyed face critical hiring bottlenecks, so building these skills internally is not always quick or possible.
Credibility With the Owner and Lender
Test results produced by a specialist with calibrated equipment and a recognised methodology are easier for the owner’s engineer and lender’s advisor to accept. That reduces retesting, re-witnessing, and arguments at the most time-critical stage of the project.
Schedule Protection
Liquidated damages for late completion are usually the EPC’s largest exposure at the end of a project. A testing partner that can mobilise quickly, test in parallel with construction, and turn around reports fast directly protects the completion date.
What EPCs Typically Outsource
The table below shows the test packages most often included in testing services for solar EPC contractors, and why each matters to the EPC.
| Package | Typical scope | Why it matters to the EPC |
|---|---|---|
| Factory and arrival QA | FAT witnessing, pre-shipment and arrival inspection, EL sampling | Rejects defective equipment before it is installed |
| DC string testing | IEC 62446-1 Category 1 tests on every string | Finds wiring errors before energisation |
| IV curve tracing | Full string-level IV dataset | Baseline for acceptance and evidence for supplier claims |
| EL and thermography | EL on suspect modules; drone and handheld IR under load | Locates damaged modules, hot spots, and loose connections |
| MV and substation | Insulation, VLF, tan delta, PD; transformer and switchgear tests | Protects energisation and grid connection |
| Systems commissioning | String and central inverter start-up, tracker commissioning, SCADA support | Brings the plant to full, controllable output |
| Acceptance support | Capacity / PPI and PR test preparation, data checks, punch lists | Secures provisional acceptance |
| Supervision | Embedding with the EPC’s team, witnessing, reviewing procedures | Raises the quality of in-house and subcontractor testing |
Each package is explained in detail elsewhere on AQ Electric’s site: the DC test sequence in its IEC 62446-1 article, string-level diagnostics in IV curve tracing for solar PV, MV testing in MV cable testing in solar PV plants, transformers in solar power plant transformers, and inverters in solar inverters in utility-scale PV plants.
Plugging Testing Into the Build Schedule
The most common mistake EPCs make with testing services for solar EPC contractors is treating testing as a phase that starts after construction ends. The better approach is to test block by block, as each part of the plant reaches mechanical completion.
- Before construction ends — agree the commissioning plan, inspection and test plans, witness points, and acceptance criteria with the owner’s engineer; confirm the performance test methodology.
- As equipment arrives — arrival inspection and EL sampling of modules; receiving inspection of inverters, transformers, and switchgear.
- As each block is mechanically complete — DC string tests, insulation tests, and combiner box checks, with defects fed straight back to the installation crews.
- As MV circuits are terminated — cable and substation tests, so energisation is not held up.
- After energisation of each block — inverter start-up, IV curves, thermography, and tracker and SCADA checks.
- At plant completion — grid compliance tests, capacity or PPI tests, punch-list closure, and handover documentation.
Testing in parallel with construction shortens the critical path, spreads the workload, and means installation errors are corrected while crews are still on site. AQ Electric describes the full sequence from the owner’s perspective in its article on the solar PV commissioning process.
Test Evidence as Protection Against Suppliers
Under a typical EPC contract, the EPC carries the risk of equipment defects towards the owner, while recovering that cost from its own suppliers depends on evidence. Independent test data from testing services for solar EPC contractors is what turns a suspected defect into a successful claim.
- Modules — arrival EL images and IV data distinguish manufacturing defects from transport or handling damage, and identify serial defects across a batch. With independent laboratories reporting record module test failure rates, this evidence is increasingly valuable. AQ Electric explains what to look for in its article on common PV module defects.
- Inverters, transformers, and switchgear — factory and site acceptance records show whether a problem existed on delivery. AQ Electric explains how in its article on FAT vs SAT in solar PV projects.
- Subcontractors — string-level test records show where installation errors were made and by whom, supporting back-charges and corrective work.
EL evidence is particularly powerful because it shows the inside of the module; AQ Electric explains the technique in its article on electroluminescence EL testing for solar PV.
Passing Acceptance and Grid Compliance First Time
For the EPC — and for the testing services for solar EPC contractors that support it — provisional acceptance is the finish line: it releases payments and retentions and stops the liquidated damages clock. Three things most often delay it.
Grid Operator Approvals
Grid operators require complete test records before they allow connection. The Saudi Arabian Grid Code (2021), for example, requires commissioning test procedures, site test reports, and protection settings to be submitted, followed by a statement of readiness to connect with the commissioning test reports; the transmission service provider then issues a technical completion certificate within 15 days if the reports are acceptable, or may require further tests. Incomplete or inconsistent reports cost weeks. AQ Electric covers the Saudi market in its article on solar PV testing services in Saudi Arabia.
Performance Tests
Capacity or power performance index tests at completion are short — IEC TS 61724-2 describes a test typically performed over three to five days — but they are easy to get wrong. Engineering firm Burns & McDonnell has documented how inverter clipping on tracking plants with DC-to-AC ratios above roughly 1.3–1.4 can remove most usable midday data. Agreeing the methodology early and checking sensors and data before the test window avoids failed or disputed tests. AQ Electric explains the metrics in its article on the solar performance ratio.
Punch Lists and Documentation
Owners and lenders will not sign acceptance with safety-critical punch items open or with gaps in the handover pack. A testing partner that tracks punch items to closure and assembles test records as it goes prevents a documentation scramble at the end. The owner’s side of this process is described in AQ Electric’s article on the owner’s engineer for solar PV projects.
Engagement Models
Testing services for solar EPC contractors are usually contracted in one of four ways.
| Model | How it works | Best for |
|---|---|---|
| Full testing package | The partner performs all testing and commissioning for defined systems, often priced per MW or per package | EPCs without an in-house commissioning team in the country |
| Specialist packages | The partner performs selected tests, such as IV curves, EL, or MV testing | EPCs with their own team but not the specialist equipment |
| Supervision and witnessing | Specialists embed with the EPC’s team, review procedures, and witness tests | EPCs using local subcontractors who need oversight |
| Surge support | Additional engineers and equipment for the peak weeks | EPCs with a team that cannot cover the peak alone |
What the EPC Should Receive
- Test procedures and ITPs aligned with the project specification and approved by the owner’s engineer.
- Calibrated equipment with valid certificates for every instrument used.
- Daily progress and defect reports so construction crews can act immediately.
- Complete test records — per string, per inverter, per circuit — in a format the owner and grid operator accept.
- Defect and punch-list registers tracked to closure.
- Supplier claim packages with EL, IV, and thermography evidence where defects are found.
- A handover-ready commissioning report as part of the plant documentation.
For EPCs that also want to strengthen their own site teams, practical training can run alongside the project; AQ Electric covers this in its article on solar PV training for engineers. For the instruments themselves, AQ Electric’s sister company EE Electronics supplies solar PV testers in Jordan and lists the wider toolkit in its article on the electrical testing equipment list for Jordan.
How EPCs Measure the Value
The return on testing services for solar EPC contractors shows up in a small number of indicators:
- Days to provisional acceptance compared with the baseline schedule.
- Retest rate — tests repeated because of errors or rejected records.
- Defects found before versus after energisation — the earlier, the cheaper.
- Supplier and subcontractor recoveries supported by test evidence.
- Acceptance test outcome — passed first time, or disputed.
- Post-acceptance defects raised by the owner during the defects period.
That last indicator matters more than many EPCs expect. Raptor Maps’ 2026 Global Solar Report found an average power loss of 4.46% already present at commissioning; defects missed at handover tend to return as warranty claims and reputational damage. Choosing the right partner is covered in detail in AQ Electric’s article on how to choose a solar testing and commissioning partner.
EPC Testing in the Gulf and MENA
The region’s project pipeline makes testing capacity a real constraint for EPCs, and demand for testing services for solar EPC contractors is rising with it. With record solar additions forecast across the region and gigawatt-scale projects running in parallel, specialist commissioning teams are in demand. AQ Electric reviews the pipeline in its MENA solar market outlook.
Local conditions also shape how testing is done. Extreme heat limits safe working hours and affects test values, so test plans must account for temperature correction and crew safety. Dust affects thermography and irradiance sensors. Remote sites need self-sufficient teams with enough calibrated equipment. And each grid operator — from Saudi Arabia’s transmission service provider to Egypt’s EETC — has its own approval sequence; AQ Electric’s Egyptian experience is covered in its article on solar testing services in Egypt.
AQ Electric’s Testing Services for EPC Contractors
AQ Electric for Power Solutions, founded in Jordan in 2019 and expanded to Egypt in 2021, provides testing services for solar EPC contractors across the MENA region in three forms: cold commissioning (pre-energisation testing), hot commissioning (testing of the live system), and supervision, in which AQ Electric’s engineers embed with the EPC’s commissioning team. Its scope covers IEC 62446 and IEC 60364-6 testing, IV curve tracing, EL, insulation and earth resistance testing, thermography, string and central inverter commissioning, solar tracker commissioning and adjustment, SCADA support, MV cable testing including VLF, tan delta, and partial discharge, transformer and switchgear testing, and punch-list generation and verification. Full details are on AQ Electric’s solar PV testing and commissioning services page, with factory and arrival inspection available through its FAT and SAT quality assurance services.
Working for EPCs
CEEC and SEPCO – Power China
AQ Electric supported China Energy Engineering Group (CEEC) with testing and commissioning on the 230 MWp Komombo plant in Aswan, Egypt, and SEPCO – Power China with testing and commissioning on the 120 MWp Wadi Ad Dawasir plant in Saudi Arabia — utility-scale projects where testing had to keep pace with construction and satisfy the owner, lender, and grid operator.
AQ Electric operates under an ISO 9001, ISO 14001, and ISO 45001-certified management system from offices in Amman, Jordan and New Cairo, Egypt, with more than 500 MW commissioned and more than 1.0 GW of PV project experience. The full portfolio is on AQ Electric’s projects page.
Specialist Testing for EPC Contractors
AQ Electric’s testing, commissioning, and quality services across the MENA region.
⚡Testing & Commissioning✓Quality Assurance (FAT & SAT)📊IV Curve Tracing🔬EL Testing🚁Drone Inspection🎓Training Services✉Speak to an Engineer
Frequently Asked Questions
What are testing services for solar EPC contractors?
They are specialist testing, inspection, and commissioning services that an EPC procures to verify its work and its suppliers’ equipment before handover — typically DC string testing, IV curves, EL and thermography, MV and substation testing, inverter, tracker and SCADA commissioning, and acceptance-test support.
Why do EPC contractors outsource solar testing?
To cover the testing peak at the end of construction without carrying a permanent team, to access specialist equipment and skills, to produce records the owner and lender accept, and to protect the completion date against liquidated damages.
When should an EPC bring in a testing partner?
Before construction ends — ideally when the commissioning plan and inspection and test plans are being agreed — so testing can run block by block alongside construction rather than after it.
How does independent testing help EPCs with supplier claims?
Arrival EL images, IV curves, thermography, and factory and site acceptance records show whether a defect existed on delivery or was caused later, which is the evidence needed to recover costs from module, inverter, and transformer suppliers and from subcontractors.
Is a testing partner for the EPC the same as an owner’s engineer?
No. A testing partner engaged by the EPC helps the EPC complete and prove its work. An owner’s engineer works for the owner and reviews and witnesses the EPC’s testing on the owner’s behalf. Both often work on the same project.
How are solar testing services for EPCs priced?
Common models are a full testing package priced per MW or per package, specialist test packages, supervision and witnessing, and surge support at day rates during the commissioning peak.
What documentation should the testing partner deliver?
Approved test procedures and ITPs, calibration certificates, daily progress and defect reports, complete test records per string, inverter, and circuit, punch-list registers tracked to closure, supplier claim packages, and a handover-ready commissioning report.
Does AQ Electric provide testing services for EPC contractors in MENA?
Yes. AQ Electric provides cold and hot commissioning and supervision for EPC contractors across Jordan, Egypt, Saudi Arabia, and the wider MENA region, and has worked for CEEC on the 230 MWp Komombo plant and for SEPCO – Power China on the 120 MWp Wadi Ad Dawasir plant.
A Testing Team That Keeps Your Project on Schedule
AQ Electric provides testing and commissioning for solar EPC contractors across the MENA region — DC, MV, and systems commissioning, IV curves, EL, thermography, and acceptance support — with more than 500 MW commissioned alongside CEEC, SEPCO, and Power China.
